Our Mission Statement:

"To be the preferred Plant and Tool Hire provider - applying Service, Quality and Reliability in everything we do."

Points to Note before Welding Instruments Hire High Wycombe

Welding Instruments Hire High Wycombe

The kind of job, size of the shop, availability of power, along with your operation determines the type of welding equipment required. The facilities can range anywhere between small workshops at house and multimillion operation as utilised in automobile or steel fabricating manufacturing. You can opt for welding instruments hire High Wycombe to suit your specific requirements and ensure the best output at your workshop.

Safety and Protective Equipment:

When you opt for welding instruments hire High Wycombe and you need to start your work using the tools, a mask shielding your face so as to protect your eyes and face from spatter and electric rays from molten metal is a must. Make use of shield having a proper adjustable headband. Use leather gloves, apron and filledthe sleeved top. Based on the position that is being welded, you might also require a protective bib and a proper leather jacket.

Do not forget top-class work shoes, wire brush, chipping hammer, vice grips, safety glasses for the chipping welds and different clamps. Other equipment might involve heavy hammer, anvil, long-handled pliers or tongs, etc. Moreover, you must be sure to work in an area that is well ventilated.

Burning/Cutting Outfit Is Required:

In an area which is stationary ‘fixed’ instrument might available, however, in most cases portable oxy/ace burning instruments are utilised. The portable outfit on the wheels generally contains an oxygen or acetylene cylinder with an attached regulator, valves, hoses, gauges and cutting torch with a removable welding tip for gas brazing or welding. You may check out for these at the time you go for welding instruments hire High Wycombe.

General Machine Accessories:

2 cables made of copper wire covered with that insulation are required to carry out the electric current from that welding machine to work and then back the welder. Moreover, an electrode holder or stinger and lightweight whip are required. The whip/holder must be light, insulated well and also sturdy so as to withstand the wear caused because of continuous handling. Ground clamp is required too to attach the ground cable to work or welding table. You might also need cable lugs so as to attach the cable to machine.

Welding Machines:

Basically, there are 2 kinds of machines,AC (alternating current) and DC (direct current). In a workshop having single-phase electric or home current, the 225 amperes and 240-volt transformer machinesare usually used. If power is attained from public utility lines, 1 or more welding machines hire can be done such as transformers, motor generators, rectifiers, and control equipment. Going for welding instruments hire High Wycombe would be the best way to get hold of everything required during the welding process.

Thus, when in doubt you must check in with the power company of the competent electrician before welding instruments hire. In case, of unavailability of public utility power, a portable generator that is driven by diesel engines or gasoline can be used. A movable welding machine is usually rated between 200 and 300 amps, with 4-cylinder engine of around 16 hp, is quite enough to get tough jobs done.

For all your welding instruments hire High Wycombe requirements, contact the apt agency, Eros Tools Hire.

Our Locations

Aylesbury Office

Unit 7B, March Place
    Aylesbury
    Buckinghamshire
    HP19 8UG
01296 706 480

High Wycombe Office

Mill End Road
    High Wycombe
    Buckinghamshire
    HP12 4JN
01494 445 555

Eros Tools Hire © 2016 | All Rights Reserved | Terms & conditions